BBNFG - 500S CLEAR ENAMEL TOPCOATS
- MSDS: BBNFG
- Manufacturer: E I DUPONT DE NEMOURS AND CO
- Product Name: 500S CLEAR ENAMEL TOPCOATS
- National Stock Number: 8010-00F003521
Product Identification
Product ID:500S CLEAR ENAMEL TOPCOATS
MSDS Date:04/15/1987
FSC:8010
NIIN:00F003521
MSDS Number: BBNFG
Responsible Party
Emergency Phone: (800) 441-3637
Info Phone: (800) 441-7515
Cage: 19898
Contractor
Telephone: 800-441-3637
Cage: 19898
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYL ACETATE (SARA III)
CAS: 141-78-6
RTECS: AH5425000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
1-METHOXY-2-PROPANOL ACETATE
CAS: 108-65-6
RTECS: AI8925000
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
POLYMER RESINS
ACGIH TLV: 10 MG/CUM
5.7-5.9
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: GASTRO-INTESTINAL DISTRESS.
INHALATION: NOSE/THROAT IRRITATION, HEADACHES, NAUSEA,
DIZZINESS/LOSS OF COORDINATION. SKIN: IRRITATION,
DISCOMFORT/DERMATITIS. EYES: BURNING/WATERING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS CAUSES PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. INHALATION:
ASTHMA-LIKE REACTIONS W/SHORTNESS OF BREATHING, WHEEZING, COUGH OR
LUNG SENSITIZATION. SKIN: REPEATED/PROLONGED CONTACT MAY CAUSE
IRRITATION/DISCOMFORT/DERMATITIS. INGESTION: LIVER/KIDNEY INJURY.
Medical Cond Aggravated by Exposure:LUNG OR BREATHING PROBLEMS
First Aid
First Aid:INHALATION: IF AFFECTED, REMOVE TO FRESH AIR. IF BREATHING
DIFFICULTY PERSISTS, CONSULT PHYSICIAN. SKIN/EYE: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINS; CALL PHYSICIAN. SKIN: WASH W/SOAP &
WATER. CO NTACT PHYSICIAN.
Fire Fighting
Flash Point:73-100F
Lower Limits:1.1%
Upper Limits:14%
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT/SCBA. WATER SPRAY
MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WHEN HEATED >FLASH POINT IT EMITS
FLAMMABLE VAPORS WHICH CAN BURN/EXPLODE WHEN MIXED W/AIR. FINE
MISTS/SPRAYS MAY BE FLAMMABLE AT TEMPS
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE SOURCES OF IGNITION.
PREVENT SKIN CONTACT/BREATHING OF VAPOR. CONTFINED & REMOVE W/INERT
ABSORBANT.
Neutralizing Agent:0-10% AMMONIA, 2-5% DETERGENT, 80% WATER, 20%
SURFACTANT (TERGITOL TMN-10)
Handling
Handling and Storage Precautions:CLOSE CONTAINER AFTER EACH USE. GROUND
CONTAINERS WHEN POURING. WASH THOROUGHLY AFTER HANDLING & BEFORE
EATING OR SMOKING. DON'T STORE >120F.
Other Precautions:DON'T SAND, FLAME CUT, BRAZE OR WELD DRY COATING W/O
A NIOSH/MSHA APPROVED RESPIRATOR OR APPROPRIATE VENTILATION. DON'T
BREATHE VAPORS OR MISTS.
Exposure Controls
Respiratory Protection:WEAR A POSITIVE PRESSURE SUPPLIED AIR RESPIRATOR
(NIOSH/MSHA TC-19C) WHILE MIXING ACTIVATOR W/ENAMEL CLEAR, DURING
APPLICATION/UNTIL ALL VAPORS/SPRAY MIST ARE EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT LOCAL EXHAUS VENTILATION TO KEEP
Eye Protection:SPLASH GUARDS, SIDE SHIELDS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING/BEFORE EATING OR
SMOKING. DON'T PERMIT ANYONE W/O PROTECTION IN THE PAINTING AREA.
Supplemental Safety and Health
WT/GAL: 8.16-8.29
Chemical Properties
Boiling Pt:B.P. Text:76-155F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MISCIBLE
Percent Volatiles by Volume:76.7%
Stability
Stability Indicator/Materials to Avoid:YES
NONE REASONABLE FORESEEABLE
Stability Condition to Avoid:DON'T STORE >120F. HEAT, SPARKS & FLAME.
Hazardous Decomposition Products:CO, CO2, SMOKE
Disposal
Waste Disposal Methods:DON'T ALLOW MATERIAL TO CONTAMINATE GROUND WATER
SYSTEMS. INCINERATE ABSORBED MATERIAL IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REQUIREMENTS. DON'T INCINERATE IN CLOSED
CONTAINERS. FLAMMABLE LIQUID PAINT UN1263.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.